My Cart (0)

Emergency Combination Deluge Shower with Aerated Eye/Face Wash Hand Operated

  • Complete body coverage for faster decontamination
  • Freestanding combination deluge safety shower with aerated eye/face wash
  • Supplied with a stay open full flow ball valve, shower activated by a triangle pull rod
  • Face wash flow rate is 30L/Min at 140 kpa
  • Shower flow rate Is 75L/Min At 140 kpa
  • Eyewash provides the minimum required 12 litres per minute for both eyes
  • Minimum recommended water supply for unit is 25mm IPS
  • Rectangular stainless steel bow, hand operated only
View Product Details

Emergency Combination Deluge Shower with Aerated Eye/Face Wash Hand Operated

First Aid Signs - Emergency Equipment
$3,149.21

Part No.

A6530
Request a quote

Details

Emergency Combination Deluge Shower with Aerated Eye/Face Wash Hand Operated

Stainless Steel Eye Wash


Constructed of Stainless Steel, this unit provides high level performance in the most demanding environments. The Eye/Face wash is engineered to provide a fast cleansing, low velocity first aid curtain of aerated water that washes eye and face contours gently, efficiently and safely. It is activated by a push handle and connecting foot pedal. Spray pattern is a 23 x 20cm (460 sq cm) curtain of soft, aerated water, with individual spray head volume control assuring proper spray pattern under varying water pressure. Flow rate is 30L/min at 140 Kpa.


Emergency Shower


The shower is non clogging and self cleaning. The impeller action of these heads distributes floods of water without voids in the shower pattern, that ensures complete body coverage for faster decontamination. The shower is activated by a rigid pull down triangular pendant handle. Flow rate is 75 L/min at 140 Kpa. The minimum recommended water supply for the unit is 25mm IPS. It requires 32mm (1.25 BSPM) standard 1650mm above floor level. Standards recommend 15 minutes continuous water during an emergency. Ideal for any site that store and handles hazardous liquids.

Includes both eye wash and emergency shower

Shower is activated by triangular pull rod

Face wash flow rate is 30L/Min at 140 kpa

Shower flow rate Is 75L/Min at 140 kpa

Frequently Asked Questions

Do I need to provide an emergency shower?

According to Safe Work Australia, emergency shower equipment should be provided in workplaces where there is a risk of employees being exposed to hazardous chemicals resulting in skin contamination or absorption from infectious substances, or serious burns to a large area of the body or face. This includes chemical and electrical burns or burns that are deep, in sensitive areas or larger than a 20 cent coin.


Where should an emergency shower be placed?

Generally, an emergency shower should be available as close to areas where employees are exposed to hazardous chemicals. Additional guidance is available in AS 4775–2007: Emergency eyewash and shower equipment.


How do I install this emergency shower?

To install the Emergency Combination Deluge Showers with Aerated Eye/Face Wash ensure all components are present after unpacking from the carton. Before mounting the bottom stanchion section, mark out the floor. Mount stanchion using suitable anchors. After mounting the stanchion section, assemble the top section and use pipe sealant on all joints. Assemble shower head and pull rod, attach foot pedal and paddle handle. After the unit is completely assembled, connect the water supply to the 25mm top inlet.


Is this emergency shower portable?

The Emergency Combination Deluge Showers with Aerated Eye/Face Wash is not designed to be moved frequently once installed.

Features

  • Includes both eye wash and emergency shower
  • Shower is activated by triangular pendant handlee

Technical Specifications

  • Shower head to floor - 2134mm
  • Water supply inlet height - 1650mm

Compatible Accessories

Specifications

Compliance
AS 4775-2007
Is this a heavy item?
Yes
Supplier Brand
Speakman

Documentation

Free Delivery for online orders over $249 (inc. GST)*
For more information on shipping and handling, click here.

 

If you are not satisfied with a Standard Product(s), you may request either a replacement or refund for the Product(s) within 30 days from the date of purchase. Please call our Customer Service team on 1800 531 492 to request a Return of Goods Authorisation (RGA). Custom Product(s) cannot be returned or refund requested unless faulty/does not match the artwork proof signed-off by the Customer.