Surface Preparation for Application: Pressure sensitive adhesives perform
best on smooth, clean, dry surfaces. Use these guidelines for preparing
surfaces for application:
1. If surface is contaminated with oil or grease, clean it with an evaporative
solvent such as methyethylketone.
2. If surface is dirty, clean it with #600 emery cloth or 0000 steel wool,
followed by solvent cleaning as above.
3. Rough surfaces can be smoothed with sandpaper, then with steel wool,
and solvent-cleaned to remove residual dirt.
4. A final cleaning with a dry, lint-free cloth is advised to remove any